Marine Window

Marine Window

  • Marine Window
Marine Window

Marine Window

  • Type:Marine use
  • Material:Steel/ Aluminum
  • Install:Hinged,Bolted,Welded
  • Watertight/ Weathertight/fireproof
  • Product description: Marine window is arranged in a second level building, as square and rectangular window for light or ventilation.
  • INQUIRY

Marine Window

Summary

Location: a rectangular window is arranged in a second level building, as square and rectangular window for light or ventilation.

Structure: inner side open type, outside open type, inside open type, drop type and fixed type, etc., under pressure is less than 5m water column (the larger transparent size the lower pressure resistant .)

Equipped with: according to the size of the rib spacing, visual field, the need of light

The rectangular window is arranged on the wall of the upper deck superstructure. rectangular window of the periphery with a rubber seal, close with the bolt pressed, the requirements to ensure weathertight.

Dimensions

Rectangular window according to the size of the rib spacing with a suitable window, the other to consider is water tight pressure. Transparent size 400mm x 300mm can bear 50Pa pressure, 350mm x 50mm, 400mm x 550mm, 450mm x 600mm can be confined to 20Pa. In the superstructure of the general compartment window, the large size of the (550mm x 600mm, 600mm x 700mm, 800mm x 900mm) window is used to request a wide driving room.

Classification

Welded Marine window

1.Dimension of wall opening:W1*H1*R1

2.Hose test shall be carried out as follow,hose nozzle diameter: >16 hosing distance from window 2.5-3m, water

pressure 0.2Mpa after maintain the pressure fro 3 minutes no water mark could be found on the back of window

3.Both side of glass to be applied with removable plastic lamina

4.Half-round head bolts GB67-76 may be used for item

5.During installing the gap between window frame and wall as wall as the gap in way of bolt hole to be filled putty.

Fixed Marine Window

1.the steel part shall CB*/Z343 hot-dip processing , leaching layer thickness of not less than 45um, aluminum oxide plate blasting quality

2.flush test requiment: Nozzle diameter greater than 12.5mm, flushing distance: 1.5m ,nozzle water pressure:0.25 Mpa

3.In according to all other requirement refer ISO3903: 1993 shipbuilding and marine sturctures, marine ordinary recangluar window standard

4.After the steel main frame sand-blasting spit twice primer, color is gray


PREVIOUS:Marine CableNEXT:Marine Door

CONTACT US

Contact: Dave

Phone: +86-023-67413946

Tel: +86-023-67413946

Email: manager@chinamooring.com

Add: 20-5 Fortune Center, Star Avenue 16 North New District ,Chongqing ,China