Marine Electric Windlass
Electric windlass consists of marine explosion-proof three speed motor with belt brake, main electric control box, main controller IP56 and wear resistant marine anchor chain wheel, marine hardened reducer, non-asbestos brake to the environmental protection.
IACS windlass requirement
1. The windlass should have the independent driving force of the original.
2. The rated tensile strength of the anchor shall be no less than 41.68d2N , while the rated tension of the d<25mm shall be no less than 36.8d2N, D as the chain diameter, and the unit is mm. The average speed of the anchor when using the rated tension is not less than 9m/min.
3. Windlass under rated tension and speed should be continuous 30min, and should be continuous work in not less than 1.5 times of the rated tension overload tension under 2min; in addition to windlass should be equipped with overload protection device, overload can transferred to the medium speed operation.
4. Anchor chain sprocket on the brake should be reliable, 45 per cent of the brake chain fracture load pull (when freedom anchor at speeds of up to 5~7.5m/s can still stopped on the outskirts of falling chain); between the windlass chain wheel and axle load should be a clutch, brake and clutch manipulation is convenient and reliable; anchor machine operation should be along the reverse rotation and smoothly and rapidly.
5.windlass installation shall ensure the cable leads three eyes in line (hawse pipe, chain stopper and roller wheel).
Electric windlass data
|Electric Anchor Windlass|
|Model||Chain dia||Working load||Support load||Speed||Load||Motor|
Add: 20-5 Fortune Center, Star Avenue 16 North New District ,Chongqing ,China